プレスリリース
2026.05.15
血管にかかる力を再現する三次元培養血管モデルを開発 – ステント留置を可能にし、次世代ステント設計に貢献 -(船本 健一 教授)
READ MORE
Tohoku University “Mechanical Engineering” is a place to challenge research for human happiness and the future in the world's best environment. We create tomorrow's affluence with free ideas.
Tohoku University “Mechanical Engineering” is a place to challenge research for human happiness and the future in the world's best environment. We create tomorrow's affluence with free ideas.
Tohoku University “Mechanical Engineering” is a place to challenge research for human happiness and the future in the world's best environment. We create tomorrow's affluence with free ideas.
Tohoku University “Mechanical Engineering” is a place to challenge research for human happiness and the future in the world's best environment. We create tomorrow's affluence with free ideas.
Tohoku University “Mechanical Engineering” is a place to challenge research for human happiness and the future in the world's best environment. We create tomorrow's affluence with free ideas.
Tohoku University “Mechanical Engineering” is a place to challenge research for human happiness and the future in the world's best environment. We create tomorrow's affluence with free ideas.
Tohoku University “Mechanical Engineering” is a place to challenge research for human happiness and the future in the world's best environment. We create tomorrow's affluence with free ideas.
Tohoku University “Mechanical Engineering” is a place to challenge research for human happiness and the future in the world's best environment. We create tomorrow's affluence with free ideas.
Tohoku University “Mechanical Engineering” is a place to challenge research for human happiness and the future in the world's best environment. We create tomorrow's affluence with free ideas.
Tohoku University “Mechanical Engineering” is a place to challenge research for human happiness and the future in the world's best environment. We create tomorrow's affluence with free ideas.
Tohoku University “Mechanical Engineering” is a place to challenge research for human happiness and the future in the world's best environment. We create tomorrow's affluence with free ideas.
受賞
2017.04.21

上の写真は、日本機械学会奨励賞(研究)を受賞した古澤卓助教のものです。
永井 大樹 教授(流体科学研究所)らの研究グループと、西山 秀哉 教授(流体科学研究所)らのグループが、それぞれ2016年度(平成28年度)日本機械学会賞(論文)を受賞しました。
また、古澤 卓 助教(情報科学研究科情報基礎科学専攻計算数理科学分野 山本・佐野研究室)と、岡島 淳之介 助教(流体科学研究所)が、それぞれ2016年度日本機械学会奨励賞(研究)を受賞しました。
授賞式は2017年4月20日(木)2016年度日本機械学会定時社員総会(於:明治記念館)にて執り行われました。
2016年度(平成28年度)日本機械学会賞(論文)
・受賞年月日 :2017年4月20日
・授与団体名 :日本機械学会
・受賞者氏名 :松田 雄太、長野 方星、岡崎 峻、小川 博之、永井 大樹
・受賞内容 :マルチエバポレータ型ループヒートパイプの内部流動特性に関する研究(微小重力環境下での蒸発器及び凝縮器の可視化)
2016年度(平成28年度)日本機械学会賞(論文)
・受賞年月日 :2017年4月20日
・授与団体名 :日本機械学会
・受賞者氏名 :高奈 秀匡、中川路 周作、上原 聡司、西山 秀哉
・受賞内容 :Nano powder transportation by combining plasma actuation and electrostatic mixing in a tube Journal of Fluid Science and Technology
2016年度(平成28年度)日本機械学会奨励賞(研究)
・受賞年月日 :2017年4月20日
・授与団体名 :日本機械学会
・受賞者氏名 :古澤 卓(情報科学研究科 情報基礎科学専攻 助教)
・受賞内容 :超臨界流体の熱流動解析手法の開発とその応用の研究
2016年度(平成28年度)日本機械学会奨励賞(研究)
・受賞年月日 :2017年4月20日
・授与団体名 :日本機械学会
・受賞者氏名 :岡島 淳之介(流体科学研究所 助教)
・受賞内容 :マイクロチャネル内相変化伝熱現象を利用した医療用小型冷凍デバイスの研究
プレスリリース
2026.05.15
血管にかかる力を再現する三次元培養血管モデルを開発 – ステント留置を可能にし、次世代ステント設計に貢献 -(船本 健一 教授)
READ MORE
プレスリリース
2026.05.13
1.0%の微細粗さで空気抵抗43.6%低減を世界で初実証 -流体工学80年の常識を覆す発見、航空機などの省エネに期待-(焼野 藍子 准教授)
READ MORE
プレスリリース
2026.05.13
閃光で一瞬!スピンデバイスを作る -ミリ秒光パルス照射で、磁気メモリ・センサの熱処理を約1.7秒で完了-(千葉 大地 教授)
READ MORE
プレスリリース
2026.05.08
6G通信に向けたテラヘルツ光スイッチを開発 -単層シリコン基板で導波路とMEMSの一体化を世界初実証-(金森 義明 教授)
READ MORE
イベント
2026.05.08
先進複合材料の製造における高度デジタル人材育成に関する特別講座を実施
READ MORE